Differences

This shows you the differences between two versions of the page.

--- openbsd:irc:eggdrop [2019/12/06 01:25]
jrmu old revision restored (2019/12/05 14:19)
+++ openbsd:irc:eggdrop [2020/07/26 18:01]
fizi
@@ Line 1: / Line 1: @@
+To install eggdrop:
 <code>
 $ cd ~
-$ wget https://ftp.eggheads.org/pub/eggdrop/source/1.8/eggdrop-1.8.4.tar.gz
+$ ftp https://ftp.eggheads.org/pub/eggdrop/source/1.8/eggdrop-1.8.4.tar.gz
 $ sha256 eggdrop-1.8.4.tar.gz
 </code>
-SHA256 Sum: 79644eb27a5568934422fa194ce3ec21cfb9a71f02069d39813e85d99cdebf9e
+The SHA256 Sum should be: 79644eb27a5568934422fa194ce3ec21cfb9a71f02069d39813e85d99cdebf9e
 <code>
@@ Line 17: / Line 19: @@
 $ cd ~
 $ cd eggdrop
-$ ./eggdrop -m yourbotnick.conf
 </code>
+Edit eggdrop.conf or Create your own configuration file (.conf) using nano or vi then run it using:
+<code>
+$ ./eggdrop -m <configuration filename>.conf
+</code>
 To verify the signature:
 <code>
 $ gpg --keyserver ha.pool.sks-keyservers.net --recv-key E01C240484DE7DBE190FE141E7667DE1D1A39AFF
+</code>
+An Example for below configuration file.
+<code>
+Core Setting Example:
+set admin "ABC"
+set nick "Shooter"
+set altnick "Shooter_"
+set realname "Channel Bot"
+AN example of Set Server:
+set network "ircnow"
+set net-type "5"
+set init-server { putserv "mode Shooter i" }
+set default-port 6667
+set servers { irc6.ircnow.org:6667 irc.ircnow.org:6667 any1.lecturify.com:6667 }
+</code>
+Here is a simple configuration file to use.
+Just make sure to change all in CAPITAL LETTERS with your preferred settings. As demonstrated in above example.
+Strings with # as prefix are comments. Edit & save this config with your botname.conf .
+<code>
+### Core Settings ###
+set admin "OWNERNICK"
+set nick "BOTNICK"
+set altnick "ALTBOTNICK"
+set realname "CHANNEL BOT"
+#### SERVER MODULE ####
+# What is your network?
+# Type = Network Name
+#    0 = EFnet
+#    1 = IRCnet
+#    2 = Undernet
+#    3 = DALnet
+#    4 = +e/+I/max-modes 20 Hybrid
+#    5 = Others
+set network "NETWORK NAME"
+set net-type "5"
+set init-server { putserv "mode BOTNICK i" }
+set default-port 6667
+set servers {
+  YOU.NEED.TO.CHANGE.THIS:6667
+  ANOTHER.EXAMPLE.COM:7000:PASSWORDifANY
+  SSL.EXAMPLE.NET:+6697
+}
+set timezone "GMT"
+set offset "0"
+set env(TZ) "$timezone $offset"
+set my-hostname "PUT YOUR SHELL'S IPV4 VHOST HERE OR LEAVE  IT BLANK"
+set my-ip "PUT YOUR SHELL'S IPV4 HERE OR LEAVE  IT BLANK"
+### Logfile Settings ###
+set max-logs 5
+set max-logsize 0
+set quick-logs 0
+set raw-log 0
+logfile mcobxs * "logs/BOTNICK.log"
+logfile jkp #CHANNELNAME "logs/#CHANNELNAME.log"
+set log-time 1
+set keep-all-logs 1
+set logfile-suffix ".%d%b%Y"
+set switch-logfiles-at 300
+set quiet-save 0
+### Console Settings ###
+set console "mkcobxs"
+### File & Directory Settings ###
+# Replace "BOTNICK" below with your bot nick.
+set userfile "BOTNICK.user"
+set pidfile "pid.BOTNICK"
+set chanfile "BOTNICK.chan"
+set force-expire 0
+set share-greet 0
+set use-info 1
+set sort-users 0
+set help-path "help/"
+set text-path "text/"
+set temp-path "/tmp"
+set motd "text/motd"
+set telnet-banner "text/banner"
+set userfile-perm 0600
+set mod-path "modules/"
+##### BOTNET/DCC/TELNET #####
+# Replace "BOTNICK" below with your bot nick.
+set botnet-nick "BOTNICK"
+# If you wish to use only one port, use this format:
+# listen 3333 all
+# change the port number in order to open
+# the listen port. You should not keep this set to 3333.
+# Put your shell/server listening port below and uncomment it. (remove # )
+#listen 1337 all
+set remote-boots 0
+set shareunlinks 0-
+set protect-telnet 1
+set dcc-sanitycheck 1
+set ident-timeout 0
+set require-p 1
+set open-telnets 0
+set stealth-telnets 0
+set use-telnet-banner 0
+set connect-timeout 30
+set dcc-flood-thr 3
+set telnet-flood 5:60
+set paranoid-telnet-flood 1
+set resolve-timeout 15
+### Channel Settings ###
+loadmodule channels
+set default-flood-chan 15:60
+set default-flood-deop 3:10
+set default-flood-kick 3:10
+set default-flood-join 5:60
+set default-flood-ctcp 3:60
+set default-flood-nick 5:60
+set default-aop-delay 0:00
+set default-idle-kick 0
+set default-chanmode "nt"
+set default-stopnethack-mode 0
+set default-revenge-mode 0
+set default-ban-type 3
+set default-ban-time 120
+set default-exempt-time 60
+set default-invite-time 60
+set default-chanset {
+        -autoop         -autovoice
+        -bitch          +cycle
+        +dontkickops    +dynamicbans
+        +dynamicexempts +dynamicinvites
+        -enforcebans    +greet
+        -inactive       -nodesynch
+        -protectfriends +protectops
+        -revenge        -revengebot
+        -secret         -seen
+        +shared         -statuslog
+        +userbans       +userexempts
+        +userinvites    -protecthalfops
+        -autohalfop     -static
+}
+# Replace your channel name with below-mentioned CHANNELNAME
+channel add #CHANNELNAME {
+chanmode "+tn"
+idle-kick 0
+flood-chan 5:4
+flood-join 5:10
+flood-ctcp 3:60
+flood-deop 0:0
+flood-kick 0:0 }
+channel set #CHANNELNAME -enforcebans -dynamicbans -autoop -autovoice -protectops -protectfriends
+### Advanced Settings ###
+set ignore-time 5
+set hourly-updates 00
+# Replace Your nick name with below mention “OWNERNICK”
+set owner "OWNERNICK"
+# Also replace below mention port no 1337 with your listening port no.
+set notify-newusers "1337"
+set default-flags "hp"
+set whois-fields "url birthday"
+set die-on-sighup 0
+set die-on-sigterm 1
+# if you wish to disable the .tcl and .set commands.
+# Uncomment (Remove # ) from below these two lines. If you select your owners wisely, you should be okay enabling these
+#unbind dcc n tcl *dcc:tcl
+#unbind dcc n set *dcc:set
+set muste-owner 1
+unbind dcc n simul *dcc:simul
+set max-dcc 50
+set enable-simul 1
+set allow-dk-cmds 1
+set dupwait-timeout 5
+### Module Settings ###
+loadmodule dns
+loadmodule transfer
+loadmodule share
+loadmodule server
+loadmodule ctcp
+loadmodule irc
+loadmodule notes
+loadmodule console
+loadmodule blowfish
+checkmodule blowfish
+loadmodule uptime
+loadmodule channels
+set keep-nick 1
+set strict-host 0
+set quiet-reject 1
+set lowercase-ctcp 0
+set answer-ctcp 3
+set flood-msg 5:5
+set flood-ctcp 3:60
+set never-give-up 1
+set strict-servernames 0
+set server-cycle-wait 60
+set server-timeout 60
+set servlimit 0
+set check-stoned 1
+set use-console-r 0
+set debug-output 0
+set serverror-quit 1
+set max-queue-msg 300
+set trigger-on-ignore 0
+set double-mode 0
+set double-server 0
+set double-help 0
+set optimize-kicks 1
+set stack-limit 4
+set ctcp-mode 0
+set bounce-bans 1
+set bounce-modes 0
+set max-bans 100
+set max-modes 30
+set kick-fun 0
+set ban-fun 0
+set learn-users 0
+set wait-split 600
+set wait-info 180
+set mode-buf-length 200
+bind msg - ident *msg:ident
+bind msg - addhost *msg:addhost
+set no-chanrec-info 0
+set bounce-exempts 0
+set bounce-invites 0
+set max-exempts 20
+set max-invites 20
+set prevent-mixing 1
+set max-dloads 3
+set dcc-block 1024
+set copy-to-tmp 1
+set xfer-timeout 30
+set share-compressed 1
+set max-notes 50
+set note-life 60
+set allow-fwd 0
+set notify-users 1
+set notify-onjoin 1
+set console-autosave 1
+set force-channel 0
+set info-party 0
+### Script Settings ###
+# For additional TCL scripts, addition can be made under Script Settings .
+# You can add any desire tcl script example.tcl file in scripits folder:  /user/eggdrop/scripts
+# and then can add below line as source scripts/example.tcl
+# Resash the eggdrop after adding the scripts to work.
+source scripts/alltools.tcl
+source scripts/action.fix.tcl
+source scripts/cmd_resolve.tcl
+source scripts/compat.tcl
 </code>

IRCNow

Page Tools

Site Tools

User Tools

Differences