Differences

This shows you the differences between two versions of the page.

--- openbsd:irc:eggdrop [2020/07/20 03:26]
baby
+++ openbsd:irc:eggdrop [2020/07/26 19:20] (current)
fizi
@@ Line 27: / Line 27: @@
 To verify the signature:
 <code>
@@ Line 32: / Line 33: @@
 </code>
-Here is a simple configuration file to use.
-Just make sure to change all in CAPITAL LETTERS with your preferred settings.
+An Example for below configuration file.
 <code>
-set admin "REPLACE WITH YOURNAME"
+Core Setting Example:
-set nick "REPLACE WITH YOUR BOT'S NICKNAME"
-set altnick "REPLACE WITH AN ALTERNATIVE BOT NICKNAME"
+set admin "ABC"
-set realname "REPLACE WITH ANY DESCRIPTION YOU LIKE FOR YOUR BOT"
+set nick "Shooter"
+set altnick "Shooter_"
+set realname "Channel Bot"
+AN example of Set Server:
 set network "ircnow"
+set net-type "5"
+set init-server { putserv "mode Shooter i" }
+set default-port 6667
+set servers { irc6.ircnow.org:6667 irc.ircnow.org:6667 any1.lecturify.com:6667 }
+</code>
+Here is a simple configuration file to use.
+Just make sure to change all in CAPITAL LETTERS with your preferred settings. As demonstrated in above example.
+Strings with # as prefix are comments. Edit & save this config with your botname.conf .
+<code>
+### Core Settings ###
+set admin "OWNERNICK"
+set nick "BOTNICK"
+set altnick "ALTBOTNICK"
+set realname "CHANNEL BOT"
+#### SERVER MODULE ####
+# What is your network?
+# Type = Network Name
+#    0 = EFnet
+#    1 = IRCnet
+#    2 = Undernet
+#    3 = DALnet
+#    4 = +e/+I/max-modes 20 Hybrid
+#    5 = Others
+set network "NETWORK NAME"
 set net-type "5"
-set init-server { putserv "mode eggdrop i" }
+set init-server { putserv "mode BOTNICK i" }
 set default-port 6667
-set servers { irc6.ircnow.org:6667 irc.ircnow.org:6667 any1.lecturify.com:6667 }
+set servers {
+  YOU.NEED.TO.CHANGE.THIS:6667
+  ANOTHER.EXAMPLE.COM:7000:PASSWORDifANY
+  SSL.EXAMPLE.NET:+6697
+}
 set timezone "GMT"
 set offset "0"
 set env(TZ) "$timezone $offset"
-set my-ip "PUT YOUR SHELL'S IPV4 HERE"
+set my-hostname "PUT YOUR SHELL'S IPV4 VHOST HERE OR LEAVE  IT BLANK"
+set my-ip "PUT YOUR SHELL'S IPV4 HERE OR LEAVE  IT BLANK"
+### Logfile Settings ###
 set max-logs 5
 set max-logsize 0
 set quick-logs 0
+set raw-log 0
+logfile mcobxs * "logs/BOTNICK.log"
+logfile jkp #CHANNELNAME "logs/#CHANNELNAME.log"
 set log-time 1
 set keep-all-logs 1
-set logfile-suffix ""
+set logfile-suffix ".%d%b%Y"
 set switch-logfiles-at 300
 set quiet-save 0
+### Console Settings ###
 set console "mkcobxs"
-set userfile "eggdrop.user"
-set pidfile "pid.eggdrop"
+### File & Directory Settings ###
-set chanfile "eggdrop.chan"
+# Replace "BOTNICK" below with your bot nick.
+set userfile "BOTNICK.user"
+set pidfile "pid.BOTNICK"
+set chanfile "BOTNICK.chan"
 set force-expire 0
 set share-greet 0
@@ Line 75: / Line 128: @@
 set mod-path "modules/"
+##### BOTNET/DCC/TELNET #####
+# Replace "BOTNICK" below with your bot nick.
+set botnet-nick "BOTNICK"
+# If you wish to use only one port, use this format:
+# listen 3333 all
+# change the port number in order to open
+# the listen port. You should not keep this set to 3333.
+# Put your shell/server listening port below and uncomment it. (remove # )
-set botnet-nick "REPLACE WITH YOUR BOT'S NICKNAME"
 #listen 1337 all
 set remote-boots 0
@@ Line 85: / Line 146: @@
 set ident-timeout 0
 set require-p 1
-set open-telnets 0
+set open-telnets 1
 set stealth-telnets 0
 set use-telnet-banner 0
@@ Line 93: / Line 154: @@
 set paranoid-telnet-flood 1
 set resolve-timeout 15
+### Channel Settings ###
 loadmodule channels
-set global-flood-chan 4:5
+set default-flood-chan 15:60
-set global-flood-deop 0:0
+set default-flood-deop 3:10
-set global-flood-kick 0:0
+set default-flood-kick 3:10
-set global-flood-join 4:05
+set default-flood-join 5:60
-set global-flood-ctcp 2:02
+set default-flood-ctcp 3:60
-set global-flood-nick 5:20
+set default-flood-nick 5:60
-set global-aop-delay 0:00
+set default-aop-delay 0:00
-set global-idle-kick 0
+set default-idle-kick 0
-set global-chanmode "nt"
+set default-chanmode "nt"
-set global-stopnethack-mode 0
+set default-stopnethack-mode 0
-set global-revenge-mode 0
+set default-revenge-mode 0
-set global-ban-time 0
+set default-ban-type 3
-set global-exempt-time 60
+set default-ban-time 120
-set global-invite-time 60
+set default-exempt-time 60
-set global-chanset {
+set default-invite-time 60
-        -autoop -autovoice
-        -bitch -cycle
+set default-chanset {
-        +dontkickops -dynamicbans
+        -autoop         -autovoice
-        +dynamicexempts +dynamicinvites
+        -bitch          +cycle
-        -enforcebans -greet
+        +dontkickops    +dynamicbans
-        -inactive +nodesynch
+        +dynamicexempts +dynamicinvites
-        -protectfriends -protectops
+        -enforcebans    +greet
-        -revenge -revengebot
+        -inactive       -nodesynch
-        -secret +seen
+        -protectfriends +protectops
-        +shared -statuslog
+        -revenge        -revengebot
-        +userbans +userexempts
+        -secret         -seen
-        +userinvites -protecthalfops
+        +shared         -statuslog
-        -autohalfop
+        +userbans       +userexempts
-}
+        +userinvites    -protecthalfops
-channel add #REPLACE WITH YOUR CHANNEL'S NAME {
+        -autohalfop     -static
+}
+# Replace your channel name with below-mentioned CHANNELNAME
+channel add #CHANNELNAME {
 chanmode "+tn"
 idle-kick 0
@@ Line 132: / Line 200: @@
 flood-deop 0:0
 flood-kick 0:0 }
-channel set #dennis -enforcebans -dynamicbans -autoop -autovoice -protectops -protectfriends
+channel set #CHANNELNAME -enforcebans -dynamicbans -autoop -autovoice -protectops -protectfriends
+### Advanced Settings ###
 set ignore-time 5
 set hourly-updates 00
-set owner "dennis"
+# Replace Your nick name with below mention “OWNERNICK”
+set owner "OWNERNICK"
+# Also replace below mention port no 1337 with your listening port no.
 set notify-newusers "1337"
 set default-flags "hp"
 set whois-fields "url birthday"
 set die-on-sighup 0
+set die-on-sigterm 1
+# if you wish to disable the .tcl and .set commands.
+# Uncomment (Remove # ) from below these two lines. If you select your owners wisely, you should be okay enabling these
+#unbind dcc n tcl *dcc:tcl
+#unbind dcc n set *dcc:set
+set muste-owner 1
+unbind dcc n simul *dcc:simul
 set max-dcc 50
 set enable-simul 1
@@ Line 147: / Line 235: @@
 ### Module Settings ###
 loadmodule dns
 loadmodule transfer
 loadmodule share
@@ Line 158: / Line 246: @@
 checkmodule blowfish
 loadmodule uptime
+loadmodule channels
 set keep-nick 1
 set strict-host 0
@@ Line 214: / Line 303: @@
 set info-party 0
+### Script Settings ###
-source scripts/alltools.tcl
+# For additional TCL scripts, addition can be made under Script Settings .
+# You can add any desire tcl script example.tcl file in scripits folder:  /user/eggdrop/scripts
-</code>
+# and then can add below line as source scripts/example.tcl
+# Resash the eggdrop after adding the scripts to work.
+source scripts/alltools.tcl
+source scripts/action.fix.tcl
+source scripts/cmd_resolve.tcl
+source scripts/compat.tcl
+</code>

IRCNow

Page Tools

Site Tools

User Tools

Differences